Specifications

Wingspan1060 mm (41.73 in)
Wing areaapprox. 20.7 dm2 (320.85 in2)
Wing loadingapprox. 76.2 g·dm-2 (24.98 oz·ft-2)
All-up weight1578 g (3.5 lb)
Overall length328 mm (12.91 in)
Overall widthapprox. 1500 mm (59.06 in), incl. wingtip rotors
BatteryLi-Po 3 cells, 3000 mAh
Target userIntermediate / expert
Main motorRequires a motor designed for 450/360 class heli, max. 650 W
Radio channelsRequires 9 to 10 proportional channels, or 8 proportional channels with an Arduino signal processor (see manual for detail)
Gyro systemFutaba GY750 is recommended (this would require a S-Bus receiver). Alternatively, any FBL gyro system with 3 independent gains can be used
Print bedThe parts require a print bed area of approx. 210 x 150 mm2 (8.27 x 5.91 in2)


In Line with our continuous improvement policy, specifications are subject to change without notice.